Single/Tight Fiber Holder for ILsintechSWIFT-F1F3F3A

Product Introduction – Single/Tight Fiber Holder for ILsintech SWIFT-F1 / F3 / F3A

Overview

This series of fiber holders is specifically designed for ILsintech SWIFT series fusion splicers (models: SWIFT-F1, F3, F3A). They are used to securely clamp single fibers or tight buffer fibers during the splicing process. The holders ensure precise fiber positioning during stripping, cleaning, cutting, and splicing, effectively reducing splicing loss and improving splicing success rates.

Model Description

The SWIFT-F1 splicer supports various fiber types including 0.25mm, 0.9mm, 2mm, 3mm, and indoor cables. Standard holder models include HF-250, HF-900, HF-IN, etc.

Key Features

1. Precise Clamping, Stable and Reliable

• Made of high-strength engineering plastic (e.g., HF-250 series in black plastic), durable for field use.

• Precision V-groove design ensures fiber stability during splicing, minimizing manual deviation.

• Suitable for fibers with a cladding diameter of 125µm and coating diameters from 250µm to 900µm.

2. Optimized Splicing Efficiency, Low Signal Loss

• Optimized for SWIFT series splicers, perfectly matching the fixed V-groove alignment system (cladding-to-cladding).

• Effectively reduces splicing loss: typical loss of 0.03dB for single-mode fiber and 0.02dB for multimode fiber.

• Enables fast splicing in as little as 7 seconds, improving work efficiency.

3. Strong Versatility, Compatible with Multiple Fiber Types

• Supports common optical cables, drop cables, patch cords, and other fibers used in FTTH scenarios.

• One holder covers multiple fiber diameters (250µm, 900µm, 2.0mm, 3.0mm), reducing changeover frequency and improving workflow continuity.

4. Easy to Operate, Practical for Field Use

• Simple installation: place the holder into the splicer’s holder base and push it against one side for positioning. After cutting with a compatible cleaver (e.g., CI-03A), move directly to the splicing position.

• The holder fits tightly with the splicer base without additional adjustment, suitable for indoor and outdoor engineering sites.

Key Specifications

Purchasing Recommendations

Select the appropriate holder model based on your actual fiber coating diameter:

• HF-250 – for 250µm fiber

• HF-900 – for 900µm fiber / tight buffer fiber

• HF-2.5 / HF-IN – for 2.0mm / 3.0mm indoor cable or drop cable

For more information, please feel free to contact us.